NXe JRNY

For best performance in PSP Mode, increase your marker’s ball in place delay (sometimes called loader delay). The JRNY adjusts the speed that it feeds based on how fast you are shooting. When you are using a mode like PSP, the hopper is not trying to feed 30 bps. This makes the hopper easier on paint and batteries. This also means that the force on the ball stack is not as high which makes the ball take more time to fully settle in the breach. When playing in a capped mode, increasing this setting will not have an effect on your rate of fire (relax you’ll still shoot 13.3 bps) but the combination of the JRNY and your gun will be much easier on paint.

Below you can find direct links to the instruction manuals for most marker manufacturers and board makers. You should consult your board’s instruction manual for detail on how to change this setting:

Planet Eclipse (called ball delay):

• http://www.planeteclipse.com/ego8/

Tadao Technologies (Loader Delay):

• Bob Long:

http://www.tadaotechnologies.com/downloads/Yakuza_Bob_Full_Manual.pdf

• EGO:

http://www.tadaotechnologies.com/downloads/M7_Ego7_Manual.pdf

• Others can be found by clicking on your board type at:

http://www.tadaotechnologies.com/productcart/pc/viewCat_h.asp?idCategory=3

Virtue (Eye Sensitivity):

• http://home.advantagepb.com/support/tech.html

Ape (Breech Load Delay):

• http://home.advantagepb.com/support/tech.html

Wicked Air Sportz (Ball in Place Delay):

• http://www.wickedairsportz.com/manuals.php